FAQ about parquet

We can give an estimate for a standard job before visiting and confirm the final price after inspection. Inspection and measurement in Novi Sad cost RSD 1,500; visits to nearby towns are priced separately. If you go ahead with the work, this amount is credited towards the total.

The price depends on the area, the condition of the parquet, repairs and the varnish selected. After inspection, we give a total price with a written list of what is included and what is charged separately. You know exactly what has been agreed before work begins.

We agree the schedule after inspection, taking the area, necessary repairs and drying time into account. We confirm separately when work will finish and when the floor can be used. If anything could extend the job, we explain why and propose a revised plan.

Contact us as soon as you know your plans so we can check availability. We confirm the date after inspecting the space and agreeing the scope of work.

We take on smaller jobs when they fit our schedule or other work. Tell us what is needed and where the property is, and we will check whether we can visit. We cannot guarantee an urgent visit.

Our quote sets out what is included, what is charged separately and which extra items may arise. If an additional item becomes necessary, we agree the work and price with you first.

We agree payment methods and dates for each job before starting. Any deposit is agreed at the same time; there is no single deposit requirement for every project.

Tell us what you have noticed so we can arrange an inspection. We address the complaint according to the identified cause of the problem.

The location, approximate area and a short description of what you want done are enough. If photos would help us understand the floor's condition, we will ask for them during the conversation.

The room must be empty before work starts. We agree in advance how to handle fitted wardrobes, kitchens and other fixed elements. We also check whether the skirting can stay or should be replaced.

Yes. The room where we work on the floor must be empty. You arrange for the furniture to be removed; we assess fixed elements before starting.

The area being treated should not be used during the work or the required drying period. If you plan to stay in another part of the apartment, tell us before we start so we can agree access and the order of work.

We protect the agreed areas, vacuum the floor between stages and remove waste from our work. We take care around access routes, noise and shared parts of the building.

We organise the team around the job. You receive the name and contact details of the person responsible before work starts.

No. If you leave us the keys, we agree access to the property and how to return them. We keep you informed about the important stages as work progresses.

We plan parquet work before the final painting, as fine dust or minor marks on walls can occur. When we finish, we explain how to protect the floor while other tradespeople work.

We first check the surface and finishing details, then review the completed work with you and discuss any concerns. We also explain when and how you can use the floor.

We check the wood's condition, remaining thickness, adhesion to the subfloor and signs of moisture during inspection. We then explain what can be restored, what needs replacing and what result you can expect.

There is no single number for every parquet floor. For a known type, we can offer a rough assessment, but before starting we check how much wood remains and whether it can be sanded again.

With traditional parquet, we replace blocks as part of restoring the whole room for a more even finish. With prefinished flooring, it may be possible to replace only the damaged board without restoring the entire floor. We check this on site.

We assess gaps, movement and squeaking on site. Some gaps can be treated during restoration, while movement and squeaking need separate repairs. Before starting, we explain what can be fixed and what limitations remain.

We must first inspect parquet affected by flooding, dark stains or deep damage. We take on the repair only after agreeing with you what is feasible and what result can be expected.

Our sanding machines use bags and vacuum extraction, so most sawdust is collected as we work. Some fine dust still remains. We vacuum between stages and remove waste from our work when finished.

It can be refreshed by buffing and varnishing if there is no major damage and the existing finish has not worn through to the wood. We inspect the floor before deciding whether this is enough.

We use polyurethane and water-based varnishes. We recommend products we already work with and explain what to expect from them. Together we agree the product and finish: matt, satin or gloss.

Our standard system is three coats: a primer and two finishing coats. An additional finishing coat can be applied by agreement.

Yes, after sanding back to clean wood. Oak takes stain well. We first show the shade in a less visible spot before treating the entire floor. You choose and purchase the stain.

The timing depends on the varnish and drying conditions. We give instructions for your specific floor, including when you can walk on it and when it is ready for normal use.

We confirm when furniture and rugs can return after assessing drying, the materials used and room conditions. We also explain how to move furniture in and protect its feet to avoid damaging the new finish.

We can use our materials or those you purchase. Before starting, we check that they suit the floor and the agreed work, and that the products are compatible.

We install traditional, engineered and prefinished parquet, as well as vinyl, SPC and laminate. Before agreeing the job, we check the conditions in the space and what the selected flooring requires.

We lay herringbone, chevron, mosaic, parallel patterns and borders. The chosen pattern determines the amount of material needed, the price and the installation time.

Arrange an inspection before the materials are delivered. We will then give you a preparation plan and explain the requirements for your chosen floor.

Yes, when the parquet, adhesive and subfloor are suitable for underfloor heating and all installation conditions are met. We check this before starting.

The requirements depend on the subfloor and the chosen flooring, so we do not give one percentage for every situation. We measure moisture using an appropriate method and record the result. Before installation, we confirm the subfloor is ready.

When the existing subfloor is not flat enough for the new flooring. We also check its strength and any cracks. Before applying the compound, we remove weak layers, repair cracks and apply a suitable primer.

There is no fixed number of days for every subfloor and levelling compound. Before continuing, we check and confirm that the subfloor is ready for installation.

We can remove the old flooring and adhesive, prepare the subfloor and take away waste. These items are agreed separately and listed in the quote.

We install wooden, MDF and PVC skirting. We agree the choice based on the floor, walls and the look you want. During inspection, we check how it can be fitted and finished in your space.

We usually recommend new skirting. If you want to keep the existing pieces, we check whether this is feasible before starting.

Yes. We fit transition profiles, finish corners, apply acrylic sealant and paint skirting, and trim doors. We inspect and agree the necessary details before starting.

We regularly work in Novi Sad. Visits to nearby towns depend on the size of the job; more distant locations are arranged according to the scope and our schedule. Send us the location and what is needed so we can check.

Yes, by arrangement, depending on the scope and our schedule. Send the location, approximate area and a short description of the work so we can check whether we can visit.

You can contact us 24 hours a day, every day, by phone, Viber, WhatsApp or email. Inspection and work appointments are arranged separately. We work on site; customers are not received at the registered business address.